Brand: Thermoval
Series:
ID: TVM05 KIT40A
EAN: 5904302012592
1. Single core heating mat 170W/m²
A new generation heating mat. It has excellent characteristics resulting from the application of materials (teflon and polyamide), and the modern production technology. The high power rating of this mat, guarantees the highest effectiveness of the electric floor heating system.
4 м2
2. Programmable controller TVM 05
Temperature controller depends on floor heating kit version.
3. Mounting box
Specially selected concealed, electric box, designed for easy installation of the temperature controller.
4. Sensor protection tube
Special, flexible, smooth teflon tube for floor sensor installation. The tube allows easy assembly and disassembly of the sensor.
5. Tube protective leading bow
Special mounting bow, fitted onto protective floor sensor tube. The bow allows smooth transitions between the wall and the floor and prevents uncontrolled bending.
6. Corrugated pipe
According to company standards, corrugated pipes necessary only to hide the power cable of the heating mat on the wall. Corrugated pipes are not suitable for floor sensor.
7. Manual
Our "step by step” manual in a simple and friendly way guides the installer through all stages of electric floor heating assembly.
8. Two warranty certificates
Two separate warranty certificates (heating mat and temperature controller)
Technical data:
power rating
170 W/m²
supply power
~ 230 V
cable thickness
3,5 mm
power cable length
2,5 m
heating element
multi-conductor cabled
thermal insulation
polyamide + teflon
underlay
plastic mesh
size
from: 1,00 to: 5,00 m²
installation
in glue or thin concrete laye
TVM 05is an electronic flush-mounted controller. Temperature measurement is carried out through a floor sensor cable, located in the equipment of each controller. The device has an on/off switch. Temperature is adjusted by a built -in knob.
Under the dial are two stops (limiters) that allow to set a movement limit of the knob in both directions.
This simple solution allows mechanical fixing minimum and maximum temperature volume. This reduces the possibility of accidental and uncontrolled regulation of temperature or complete movement blockage of the knob, thereby leaving a temperature in a desired position. The design of the controller allows installation of the device on a flush box Ø 60 using mounting screws. Technical data:
temperature range
from: + 5 to: + 40°C
supply voltage
~ 230 V
maximum load on the contacts
16 A
hysteresis accuracy
0,4 °C
ON/OFF switch
+
ltemperature limiter
+
LED indicator
+
floor sensor
+
IP protection level
IP 21
installation
flush mounted
mounting box
Ø 60 mm
Height: 10 cm
Width: 30 cm
Depth: 20 cm
Brutto weight: 3.07 kg
Netto weight: 3.07 kg
Reg.number:
40003842925
VAT number:
LV40003842925
CheckLegal address :
Jukuma Vācieša 7-16, Rīga, LV-1021
Warehouse address :
Lubānas iela 78, Rīga
Bank details:
LV08PARX0012726230002, PARXLV22, CITADELE AS
Mon.-Fr.: 9:00-18:00
Saturday: 9:00-15:00
Sunday: Closed